js_thumb bannerPic
Your current location:
Homepage
/
Why are domestic slow-moving wire machine tools lagging behind?

Why are domestic slow-moving wire machine tools lagging behind?

$!oneimg.title

Why are domestic slow-moving wire machine tools lagging behind?

$!oneimg.title

Analyzed from the current market conditions, high-and mid-range slow-moving wire machine tools are basically made in Switzerland and Japan, and the price is in a downward curve from the general trend, but there is not much room for decline. Often only when similar products appear in the country, the prices of related products abroad will be greatly reduced.

Once upon a time, domestic universities, such as Shanghai Jiaotong University, Nanjing University of Aeronautics and Astronautics, Harbin Institute of Technology, Nanchang University, Zhejiang University, had a very strong force in the basic theory of electrical machining and fast and slow wire processing technology. However, universities now emphasize "market" and "hot", and everyone is willing to do "immediate" academic work and achievement development. The technology like walking silk is complex, involves many types of technology, time-consuming, laborious, and long development cycle. It is conceivable that under such background and technical challenges, it is very successful!

It can be clearly found that we have regressed in the cultivation of talents for slow-moving silk manufacturing! Judging from the academic papers published by various domestic colleges and universities for doctors and masters in the past few years, many of them are works that "cope" with graduation diplomas. It can’t talk about theory, it can’t talk about reality. Most of them are "rolling" on the research results of the predecessors. It is of little significance to guide the actual production level of slow-moving wire, and even half a bucket of water is not available. Nowadays, the papers published in many professional magazines are nothing more than to complicate simple things. Complex things do not understand the mystery. The title is evaluated, and things cannot be made!

The ability to obtain national support is the impetus for the slow-moving silk to compete with foreign slow-moving silk. Financial support is one aspect. Now our country is not short of money. The key is how to guide enterprises to be willing to invest money, time and energy into projects like slow-moving silk manufacturing from a policy perspective. The market environment cannot wait for companies to spend a long time, or even decades, to "R&D and manufacturing"!

Compared with the technology of foreign slow-moving silk manufacturers, the domestic technology is far behind. The frightening thing is that the development of foreign technology has never stopped, and it is the same every year. Now the domestic high-end and mid-end markets are completely dominated by foreign slow-moving silk. When an industry sees backwardness, but ignores this backwardness to change this backwardness, this cannot but be said to be the sorrow of the relevant domestic departments. When our professors are teaching students, our electrical machining researchers are writing articles, our domestic slow-moving wire manufacturers are participating in various exhibitions, and our domestic customers are buying medium and high-end slow-moving wire machine tools. When bidding, it was all occupied by foreign machine tools and technology.

To catch up or reach the level of foreign slow-moving silk in a short time, it is a good way to establish joint ventures with foreign brands. However, judging from the current status of slow-moving silk-related joint ventures, it is only to have an "advantage" in price. Some insignificant parts are produced, like shells are produced in China. The pulse power supply and servo control system involving the core technology of slow-moving silk will not be absorbed and digested by you abroad at all, and no one in domestic enterprises wants to concentrate on absorbing and digesting! In the meantime, the purpose of joint ventures is more "business opportunities". "If the slow-moving silk joint venture involves the participation of personnel from relevant domestic scientific research institutions, it may be different.

There are not many domestic manufacturers engaged in the slow-moving silk industry, and they can produce them, but they are all working single-handedly. In terms of the grade of products, it is the "introductory machine" of slow-moving silk. No one has achieved market share. "Daqi", these manufacturers are basically "fighting each other." I also hope that the industry can think more about the status quo, concentrate on tackling key problems, give play to their respective advantages, share technology, and no longer "stare" in the face of the huge demand of the slow-moving silk market!

Related News

Solution to the drill bit falling off during the operation of the radial drilling machine

When the radial drilling machine is working, if the drill bit falls off, stop the work in time, turn off the power supply, and then perform inspection and repair work to analyze the cause of the occurrence.
2021-07-31 Trade News

How should the equipment be maintained?

The main requirements for equipment maintenance are as follows:
2021-07-31 Trade News

Why are domestic slow-moving wire machine tools lagging behind?

Analyzed from the current market conditions, high-and mid-range slow-moving wire machine tools are basically made in Switzerland and Japan, and the price is in a downward curve from the general trend, but there is not much room for decline.
2021-07-31 Trade News

Which machine tools must be checked for transmission chain transmission errors? What are the inspection methods?

However, in order to obtain accurate tooth profile, pitch and tooth division accuracy, all machine tools that are composed of a transmission chain for moving and processing gears and threads must ensure that the transmission chain has a certain accuracy.
2021-07-31 Trade News

What is the need for flatness error measurement of machine tool worktable?

In the past, the method of checking the flatness error of the machine tool work table has been the "two-point method", that is, using parallel rulers, micrometers, contour pads, frame level gauges, etc.
2021-07-31 Trade News

Talking about the Repair of the Vulnerable Parts of the Horizontal Milling Machine

The horizontal milling machine has been used for a long time, and daily maintenance is indispensable, especially the key equipment such as large and heavy machine tools of manufacturing enterprises, which are in a long-term overload operation state, and are prone to wear, pitting and fatigue damage.
2021-07-31 Trade News
DONGHAI

Follow us

Scan to visit

More exciting waiting for you!

Contact us

Add: No.118, West Zhennan Road, Libao Town, Haian County, Nantong City, Jiangsu Province
Hotline: 
86-13861910888 / 86-513-88286688
E-mail: yl@ntdh.com.cn

Links

Copyright ©  2021 Nantong Donghai Machine Tool Manufacturing Group CO.,LTD.  All rights reserved     苏ICP备16055345号